Universal Testing Machine
Loading Accuracy as high as + 1%. Straining at variable speeds to suit a wide range of materials. Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials.
Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen. High reading accuracy due to large size and design of dial. Wide range of standard and special accessories, including load stabilizer.
Easy change from plain to threaded and screwed specimens. Large effective clearance between columns enables testing of standards specimens as well as structures. Simple controls for easy of operation. Robust staining frame of an extremely rigid construction. Safe operation ensured be means of safety device.
Fully enclosed and protected pendulum.
Electronic Extensometer
An extensometer is used to measure changes in the length of an object. It is useful for stress-strain measurements and tensile tests. In the mining environment, extensometers are used to measure displacements on highwalls. Plotting Displacement vs Time enables geotechnical engineers to determine if wall failures are imminent.
Pendulum Impact Testing Machine
The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read from the maximum pointer position on the dial scale.
On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read from the maximum pointer position on the dial scale.
Coating Thickness Gauge (DFT Meter)
DESCRIPTION
This compact gauge can be used for non-destructive coating thickness measurement of non-magnetic coatings, e.g. paint, enamel, chrome on steel, and insulating coatings, e.g. paint and anodizing coatings on non-ferrous metals.
The internal probe can work on both principles, magnetic induction and the eddy currents. The probe can automatically detect the substrates type (Magnetic or not), and calculate the coating thickness and display it fast.
There are five data groups, and readings will be automatically stored to memory for general groups (Not for direct group). Each group has individual statistics, alarm limit settings and calibration. User can recall and delete specified readings easily.
![](images/PdfImg.jpg)
Ultrasonic Thickness Gauge - VM 200
Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks,
etc. in industries of petroleum, shipbuilding, power station, and machine manufacturing. Materials measured: any
hard materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC, gray
cast iron, nodular cast iron and other ultrasonic wave well-conductive materials.
Specification:
- Measuring Range - 1.0-200mm,0.05-8inch (in Steel)
![Ultrasonic Thickness Gauge](images/PdfImg.jpg)