Shear pin hardness tester
Shear pin hardness tester
This instrument is based on a new but proven constant loading system which produces clear impressions capable of indicating accurate results whether applied statically or dynamically. Loading is guaranteed constant due to a precision pin shearing off under impact.
Overview
The dynamic application of the Pin-Brinell Hardness system is suitable specially when the size of the workpiece makes it difficult or possible to hold in a vice. It is widely used in measuring hardness of castings, forgings, billets, moulds, dies, bars, rails, shafts, round & profiled steel sections, sheets from 6 mm and above, coal pulverisers and related equipment.
Specifications
| Range BHN | 100 to 450 with a standard indentor |
|---|---|
| BHN | 230 to 650 with a special carbide indentor on specific order |
| Dimensions | 240 x 115 x 55 mm |
| Weight | 1.25 kg |
| Accessories | The tester is supplied in a deluxe wooden box with 50 pins, tables & instructions for use, and a 10x MAGNIFI-SCOPE measuring magnifier |
Features
- Only one reading is taken which remains as a permanent record for checking in future
- Constant impact load on specimens guaranteed
- The pins cover the entire 100-650 Brinell range
- Smaller and narrower surfaces can be tested
- One impression measurement means no further computations required
- Penetrator is longer lasting compared to a standard Brinell Ball
- Dynamic and Static methods of testing possible
- Increased accuracy comparable to any other portable Brinell Tester.
- Portable Brinell Tester to measure hard C.I. accurately
- Tests performed at a faster rate
Images